Thanks for the effort and showing the test. Many people only share success. We need to share everything. It could help save everyone time and money. Just my guess but with only one hole and your very tight gap I would guess that the surface tension of the water will never let you fill the cell. Good luck and great job.
I done a tubed cell a good while back I personally wasnt impressed with it..The absolute highest mmw reading i have gotten from any cell type i have tried is the top hole only using plates with a 1/16″ gap…I want to get higher but now i am thinking the only way is to recover lost power back from the cell and have it return back to it ..Just keep at it we’ll crack this nut one day
Probably the problem with filling is the 1/32″ gaskets..I never have went that small of a gap..One thing I have learned with messing with this stuff is if it dont work try something else..Great work man thanks for posting it.
to get a reaction from pure distilled water, you will need many thousands of volts along with some RF … can be done, but not with a device designed for brute force electrolysis … you will get best results from your current device design using distilled water and one of the known effective electrolyte chemicals … for an effective high voltage/RF device design, think satellite dish …
March 1st, 2010 | 
Author: 
Posted in
Thx I wont
good stuff don’t give up man
i am gonna open the lower hole in a u shaped form so i can fill it normally and hope i have a little better MMW .THX
Thanks for the effort and showing the test. Many people only share success. We need to share everything. It could help save everyone time and money. Just my guess but with only one hole and your very tight gap I would guess that the surface tension of the water will never let you fill the cell. Good luck and great job.
I done a tubed cell a good while back I personally wasnt impressed with it..The absolute highest mmw reading i have gotten from any cell type i have tried is the top hole only using plates with a 1/16″ gap…I want to get higher but now i am thinking the only way is to recover lost power back from the cell and have it return back to it ..Just keep at it we’ll crack this nut one day
Probably the problem with filling is the 1/32″ gaskets..I never have went that small of a gap..One thing I have learned with messing with this stuff is if it dont work try something else..Great work man thanks for posting it.
I believe we are at a dead end to with brute force
i believe you ,so i guess we are on a dead end on brute force electrolysis.
sorry my mistake Distilled with Naoh Or koh
to get a reaction from pure distilled water, you will need many thousands of volts along with some RF … can be done, but not with a device designed for brute force electrolysis … you will get best results from your current device design using distilled water and one of the known effective electrolyte chemicals … for an effective high voltage/RF device design, think satellite dish …